Automatic Dew Point Identification Alarm

Complicated calculations needed to find areas susceptible to condensation can now be done on-site in real-time with the ThermaCAM™ B20’s patented dewpoint identification alarm.

All necessary parameters such as relatively humidity and object temperature, can be set in the camera, in the field, resulting in a real-time infrared image with dew point information which indicates potential condensation problems.

Critical areas are automatically coloured with a transparent colour alarm, allowing the building inspector to see the problem area and its structure at the same time. Because all this information is available on-site, all parties involved in the inspection, ie craftsmen, architects and construction managers, can evaluate the severity of the problem.

Text and Voice Comments

Record up to 30 seconds of voice data using the B20’s headset with integrated microphone (optimised to surpress background noise).

These recordings, together with text data suchas floor level, compass point, wind speed, wall material and thickness, are stored on the camera along with the relevant image, ready to be downloaded into ThermaCAM™ Reporter software to create professional building inspection reports.

Sound and Colour Alarms

The building inspector can set a maximum temperature value in the camera which, if exceeded, will automatically produce an audible alarm and all parts of the image where this temperature is exceeded will be highlighted by a transparent colour, ensuring that the tiniest problem area is not overlooked.